12V Electric Oil Extractor Pump

This 12V electric oil extractor pump lets you change your oil from the top of the engine. Feed the suction hose down the dipstick tube, clip it to a 12V battery and switch it on, and it pumps the old oil into your container. You don't need a jack or a creeper, and you don't have to pull the drain plug.

It works with engine oil, gear oil and other lubricating oils on cars, trucks, RVs, boats, motorcycles, ATVs, lawn mowers and generators. Allow about 30 minutes for a full oil change, and check that the hose fits your dipstick tube before you start.

• 12V DC, 80W, 6.7A electric pump
• Flow rate 0.13 GPM
• Pumps through the dipstick tube, no jack needed
• On/off switch on top of the pump
• Built-in overload protection to help protect the motor
• Coiled cable with red and black battery clamps
• 6mm x 1200mm inlet hose and 12mm x 1500mm outlet hose
• 2 hose clamps to lock the tubes in place
• For engine oil, gear/differential oil and lubricating oil (not gasoline or water)
• Run time up to 30 minutes at a stretch