Car Interior Ambient Lighting Kit – 6 Trimmable LED Strips, App & Remote Control
Car Interior Ambient Lighting Kit – 6 Trimmable LED Strips, App & Remote Control
Free Shipping & Easy Returns
10% Off When You Buy 2+ Items
Details
Dash · 4 doors · Console · One plug
Give Your Car Interior a Soft, Factory-Style Glow
This ambient lighting kit adds a clean line of light along your dashboard, all four doors and the centre console, the kind of detail usually found in high-end cars. Six flexible strips run from a single plug, and you choose the colour, brightness and mode from your phone or the included remote.
The idea
Most interiors feel flat after dark
Ambient lighting makes a cabin feel modern and relaxed at night, but it is usually reserved for expensive models or costly upgrades. Generic LED strips often do not fit well and leave wires on show.
This kit is made to be trimmed to your interior and tucked into the existing gaps, so the result looks neat and built-in.
How it installs
A self-install in about 15–20 minutes
1
Trim to length
The six strips come long on purpose. Cut each one to match your dash, doors and console.
2
Tuck into the trim
Use the tuck tool to press strips and wires into trim gaps, door seals and under the seats.
3
Plug it in
Connect to a USB, USB-C (adaptor included) or 12 V socket. No tools or modifications needed.
4
Pick your look
Choose a colour, brightness and mode in the app or with the remote.
Full-cabin coverage
Dash, doors and console from one plug
The kit lights the whole cabin rather than just one spot: a line across the dashboard, one in each of the four doors and one around the centre console.
Wires run along the trim and through the rubber door seals, so the doors open and close completely normally.
Key features
Subtle glow or bold interior, your choice
App or remote control
Change colours, brightness and modes from your phone or the remote.
Custom modes
Save your own colour combinations and effects.
Music sync
Let the lights react to the sound in the car.
Trimmable strips
Flexible strips you cut to length for a seamless finish.
Hidden wiring
Everything tucks away behind trim and seals.
Low power use
Draws very little power and only runs while the car is on.
Will it fit my car?
Made for sedans, SUVs, EVs and trucks
Because the strips are flexible and supplied long, they can be shaped and trimmed to suit most car interiors.
If your car only has USB-C ports, the included adaptor covers that too.
Good to know
- Clean the surfaces before fitting so the adhesive tape holds well.
- Measure twice before trimming a strip; a cut strip cannot be made longer.
- Keep brightness at a comfortable level while driving and follow local rules on interior lighting.
- Do not change settings in the app while driving.
Specifications
- Strips: 6 flexible, trimmable ambient light strips
- Coverage: dashboard, 4 doors and centre console
- Power: USB, USB-C (via adaptor) or 12 V socket
- Control: mobile app or remote
- Functions: colours, brightness, modes, custom modes, music sync
- Installation: self-install in about 15–20 minutes, no tools needed
What's in the box
- 6 × Ambient light strips
- 1 × Controller and wiring set
- 1 × USB to USB-C adaptor
- 1 × Tuck tool
- 1 × Roll of double-sided adhesive tape
- 1 × Remote control