Designed for flexible illumination, this ceiling fixture features a precision-molded optical acrylic canopy that remains remarkably lightweight yet far more resilient than traditional glass options. The specialized material enables smooth directional pivoting while delivering a uniformly softened, inviting glow throughout your space.
Pivot & Placement Capabilities
The attached mechanical arm rotates horizontally across a wide arc, allowing you to aim the beam precisely where it is needed. Once secured, the vertical drop remains stationary. It also installs seamlessly onto peaked or angled ceilings within a thirty-degree threshold without requiring extra mounting hardware.
Light Output & Electrical Requirements
A built-in solid-state light engine runs off standard AC 110–240V power lines. The factory configuration delivers a cozy 3000 Kelvin tone, though requests for neutral forty or cool sixty Kelvin setups can be accommodated prior to dispatch. If you select the adjustable brightness variant, you must pair it exclusively with a Triac-style wall controller to prevent strobing; basic rotary models will cause operational issues.
Dimensional Options
Three distinct circumference measurements cater to varying room scales. Each model shares a consistent depth of 3.5 inches and mounts via a four-point-seven-inch circular base plate. Wattage draw ranges between thirty-two and thirty-six watts depending on the selected width.
- 11.8 inch diameter: approximately 32 watts
- 15.7 inch diameter: approximately 36 watts (market favorite)
- 19.7 inch diameter: approximately 36 watts
| Feature | Details |
|---|---|
| Materials | Metal frame and acrylic shade |
| Light Source | Integrated LED |
| Color Temperature | Warm White 3000K standard (4000K or 6000K available upon pre-order request) |
| Power Draw | 11.8 inch model: ~32W / 15.7 inch model: ~36W / 19.7 inch model: ~36W |
| Voltage | AC 110–240V |
| Operation Control | Works with standard push-button switches (excluded); brightness adjustment requires a dedicated Triac dimmer |
| Movement | Left and right rotation; mounting height stays fixed after install |
| Angled Mounting | Compatible with ceilings sloped up to 30 degrees |
| Canopy Dimensions | Ø4.7 inches (12 cm) |
| Electrical Setup | Hardwired connection |
| Mounting Location | Ceiling |
| Ingress Protection | IP20 rating; strictly for dry interiors; not waterproof |
| Regional Compliance | Approved for North America, EU, Australia, and Saudi Arabia markets |
| Housing Tints | Beige or Green |
| Shade Finish | White |
Installation Guidelines
- Permanent bypass wiring is required; engage a licensed electrician if you lack experience with ceiling junction boxes.
- Directly fits both flat surfaces and gentle pitches measuring thirty degrees or lower without supplementary brackets.
- Horizontal rotation delivers targeted coverage, but adjusting the hanging height after securing the unit is not possible.
- Wall controllers are sold separately. Standard single-pole toggles handle basic on/off functions, while brightness control demands specific Triac hardware.
- Designed exclusively for climate-controlled indoor rooms. Avoid damp or wet environments like bathrooms.