Garden Hose Quick Connector Set – Aluminium, Click-On, Leak-Proof Seal, 3/4" GHT
Garden Hose Quick Connector Set – Aluminium, Click-On, Leak-Proof Seal, 3/4" GHT
Free Shipping & Easy Returns
10% Off When You Buy 2+ Items
Details
Push to click · Pull to release · No twisting
Switch Hoses and Sprinklers in a Single Click
These aluminium quick connectors turn every threaded hose joint into a simple click-on, click-off connection. Fit them once to your tap, hose, nozzle and sprinkler, and from then on you swap tools in a second, without twisting, stuck threads or wet sleeves.
The problem
Threaded fittings that just won't turn
Every gardener knows it: the hose is stuck on the tap, the thread is gritty, and you end up wrestling with it while water drips down your arm. Swapping from hose to sprinkler means screwing and unscrewing the same fittings again and again.
For anyone with a weaker grip, those tight threads can turn a quick watering job into a real struggle, so many people simply leave one tool attached all season.
How to install
Set up once, click forever after
1
Fit the female part
Screw the female connector onto your tap or hose end. You only do this once.
2
Fit the male part
Screw the male connector onto the hose, sprinkler or nozzle you want to attach. Also a one-time job.
3
Click and water
Push the male into the female until it clicks. To disconnect, pull back the collar and lift it off.
Each connection takes about 30 seconds to set up.
Effortless connection
Push to lock, pull to release
The spring-loaded collar does the work for you. There is no gripping and turning, just a firm push to lock the two halves together and a short pull on the collar to release them.
That makes it easier for anyone with a weaker grip, and quicker for everyone else.
Built for outdoors
Solid aluminium with a tight seal
- Aircraft-grade aluminium body – sturdy, light and resistant to rust and corrosion.
- Precision O-ring seal – designed to keep the joint watertight and maintain water pressure.
- Grip coating – a textured black sleeve for a secure hold, even with wet hands.
- Standard 3/4" garden hose thread (GHT) – fits taps, hoses, nozzles and sprinklers with this thread.
Where to use it
One system for the whole garden
Lawn, car, pool and more
Use the connectors on sprinklers for the lawn, on a spray gun for washing the car, to fill a paddling pool, or on pressure washers and other equipment that have a 3/4" garden hose connection.
Most homes use several sets: one per tap plus one for each tool you swap often.
Threaded fitting vs. quick connector
- Threaded fitting: twist on, twist off, every single time, and it can seize with grit or limescale.
- Quick connector: screw on once, then simply click together and pull apart whenever you change tools.
Good to know
✓ Check your tap and hose use a 3/4" garden hose thread; some taps need an adapter
✓ Hand-tighten the threaded side firmly; no tools needed in most cases
✓ Rinse off sand and grit now and then to keep the click smooth
✓ Turn off the water before disconnecting a pressurised hose
Specifications
- Material: aircraft-grade aluminium with grip coating
- Thread: standard 3/4" GHT (garden hose thread)
- Seal: precision O-ring
- Connection: push-to-lock, pull-back collar release
- Size: approx. 5 cm long when joined, 3.7 cm wide; openings about 2.9 cm and 2.5 cm
- Finish: rust- and corrosion-resistant
What's in the box
- Quick connector sets according to the option you choose
- Each set: 1 × female connector and 1 × male connector
