Sheet Metal Cutter Drill Attachment – Dual Wheels, Cuts Curves, No Sparks
Sheet Metal Cutter Drill Attachment – Dual Wheels, Cuts Curves, No Sparks
Free Shipping & Easy Returns
10% Off When You Buy 2+ Items
Details
Fits any drill · Cuts curves · No sparks
Turn Your Drill into a Clean, Quiet Sheet Metal Cutter
Tin snips blister your hand and curl the edge. An angle grinder throws sparks and leaves a burnt, rough line. A jigsaw shakes the sheet out of shape. This drill attachment cuts sheet metal with two wheels that shear it cleanly in one pass, straight, curved or angled, while your drill does the work.
The problem with the old ways
Why snips, grinders and jigsaws fight you
Tin snips need hard squeezing, tire your wrist and leave a ragged, curled edge.
An angle grinder makes sparks and noise and burns the edge.
A jigsaw vibrates and warps the sheet.
With this cutter, the drill does the work: no squeezing, no forearm burn, and the sheet stays flat with a burr-free edge.
Clean cuts
Two wheels shear the sheet in one pass
Unlike manual snips, it does not bend the material or leave sharp, jagged edges. You get precise, controlled cuts with no sparks and no effort. The tool keeps moving and is ready for the next line straight away.
How it is built
Four parts that do the work
- Hardened gear wheel: drives the cut, tooth by tooth.
- Adjustable pressure wheel: set the bite for each sheet thickness.
- Stabilising lever bar: keeps the head from spinning, for safety and control.
- Hex shank: fits into the chuck of any standard drill.
How it works
Cutting in four steps
1. Attach it to your drill
Insert it like any drill bit. No extra tools or setup needed.
2. Position it on the metal
Line it up with the area you want to cut. The dual cutting head lets you move in any direction: straight, curved or angled.
3. Start the drill and guide it gently
As the drill spins, the precision wheels slice through the metal cleanly and quietly, with no sparks and no jagged edges.
4. Let the waste channel clean up
The cut material is pushed out as you go, so you can keep working without jamming or stopping.
Clean workflow
No jamming, no stopping
Waste material is ejected automatically during cutting, so the mechanism stays clog-free. That means no jamming, no downtime and no constant cleaning, just a continuous workflow. Ideal for big jobs and for detailed work where every cut needs to match.
Ergonomic and safe
Light, compact and comfortable to hold
The cutter is light and compact, so you can work for a long time without getting tired. The drill does the work for you, with no squeezing or forcing.
It makes no sparks and runs quietly and cleanly, so it suits indoor and workshop use. It feels natural in the hand and gives you confidence on every move.
Before and after
From frustration to control
What it cuts
Many materials and thicknesses
Quick install
Fits in seconds, cuts at speed
The attachment installs in seconds and turns your drill into a fast cutting machine. Its dual-headed design lets you change direction smoothly without stopping to readjust.
Once it is moving, the cutter glides through metal with little resistance, saving you time and energy on every project. It is made for flat sheet cutting, for DIYers and professionals who want clean edges without distortion or burrs.
Projects
Siding, fences, garages and more
Why this cutter
Drill cutter vs the usual tools
| This drill cutter | Tin snips | Angle grinder | Jigsaw | |
|---|---|---|---|---|
| No hand squeezing | ✓ | ✗ | ✓ | ✓ |
| No sparks | ✓ | ✓ | ✗ | ✓ |
| Flat, burr-free edge | ✓ | ✗ | ✗ | ✗ |
| Cuts curves | ✓ | hard | ✗ | ✓ |
| Sheet stays flat, no warping | ✓ | ✗ | ✓ | ✗ |
| Quiet | ✓ | ✓ | ✗ | ✗ |
Adjusting the wheels
Set the cut for your material
An adjustable screw between the cutting wheels controls how tightly one wheel presses against the other. This lets you fine-tune the sharpness and precision of the cut for the thickness of the material.
Set the pressure before you start. The included 10 mm and 13 mm wrenches make this quick and easy.
Please note
Before you start
1. Sheet metal up to 1.2 mm thick
The cutter is made for thin sheet metal up to 1.2 mm.
2. A drill is needed
It works with any standard drill, cordless or corded. The drill is not included.
3. Adjust the wheel pressure first
Set it for the type of material you are cutting.
4. Flat sheets
On ribbed or corrugated panels, cut along the flat sections.
5. Stay safe
Always wear protective gear such as gloves and safety goggles.
Questions people ask
Can it cut curves?
Yes. It cuts smoothly along curved lines and uneven shapes. The dual cutting head makes it easy to change direction, so you can cut circles, arcs and custom shapes.
Will it work with my drill?
Yes. It fits all standard drills, cordless and corded. Attach it like a normal drill bit. It is compact and light, so it does not overload your drill and stays comfortable on longer jobs.
How do I adjust the wheels?
Turn the adjustable screw between the cutting wheels to set how tightly they press together, using the included 10 mm and 13 mm wrenches.
Specifications
- Type: sheet metal cutter attachment for a drill, dual cutting head
- Maximum thickness: 1.2 mm sheet metal
- Materials: iron, steel, copper, aluminium and stainless steel plate
- Shank: hex shank, fits standard cordless and corded drills
- Drill: not included
What's in the box
- 1 × drill cutter attachment
- 1 × hex key (Allen key), for adjustments and wheel replacement
- 1 × 10 mm wrench, to fine-tune the wheel position
- 1 × 13 mm wrench, to adjust the spacing between the wheels
- 1 × stabilising lever bar, stops the tool spinning during use