Ultrasonic Bark Control Device – Automatic, 3 Frequencies, Indoor & Outdoor
Free Shipping & Easy Returns
10% Off When You Buy 2+ Items
Details
Automatic · No shocks · Indoor & outdoor
A Gentle Helper for Training Excessive Barking
Barking at the doorbell, the postie or every dog that walks past can wear the whole household down. This small ultrasonic device listens for barking and answers it with a short high-frequency sound that dogs notice but people do not hear, helping your dog learn to settle. No collars, no shocks, no buttons to press.

How it works
Four simple steps, all automatic
1. Your dog barks
Once set up, the device waits quietly on standby.
2. The device detects the bark
It recognises the sound and switches on by itself, no remote needed.
3. A short ultrasonic sound plays
A high-frequency tone, inaudible to people, is designed to catch your dog's attention and interrupt the barking.
4. Your dog stops, the sound stops
When the barking stops, so does the sound. Over time many dogs learn to link the two and stay calmer. Results vary from dog to dog.





Set up in minutes
Place it where your dog barks most
Put the device on a shelf or table, or hang it on the wall with the included screws. For it to work well, mount it no higher than 60 cm off the ground and keep the space between the device and your dog free of obstacles.
Each unit reaches about 10 to 15 metres in open areas. Indoors, walls and furniture shorten this, so think of one unit per room or zone.
- Indoor and outdoor: IPX4 water resistant, so it can be used on the deck or by the fence.
- Rechargeable: charges in about 3 to 5 hours and runs 5 to 30 days, depending on use.
- LED indicator: blue flash when on, red when a bark is detected or the battery is low.
3 frequency settings
Pick the one that suits your dog

Good to know
A training aid, not a replacement for training
Every dog is different, so you may need to try a few settings. The device works best as part of a training plan with positive reinforcement, enough exercise and play, and lots of trust between you and your dog.
It is made for use in one spot around the home, not as a handheld device on walks or in noisy places such as a car.

Quiet for you
Inaudible to people
The ultrasonic sound is not audible to people, so the rest of the household is not disturbed. If you have other pets, keep an eye on how they react the first few days.
Questions people ask
Does it hurt my dog?
No shocks or collars are used. It plays a short high-frequency sound only while your dog barks.
How far does it reach?
About 10 to 15 metres in open areas. Indoors, plan on one unit per room or zone.
How do I charge it?
With the included micro-USB cable and any USB phone charger, computer port or power bank. A wall adapter is not included.
Can I use it outside?
Yes, it is IPX4 water resistant and works indoors and outdoors.
Specifications
- Range: about 10–15 m in open areas
- Frequencies: 15 kHz/30 kHz, 20 kHz, 30 kHz
- Water resistance: IPX4
- Charging: micro-USB, about 3–5 hours
- Battery life: about 5–30 days depending on use
- Mounting: on a table or shelf, or wall-mounted (max 60 cm high)
What's in the box
- 1 × ultrasonic bark control device
- 1 × mounting screw pack
- 1 × micro-USB to USB charging cable
- 1 × user manual
- Wall adapter not included


