Universal Socket Wrench – 10-20 mm Self-Tightening Jaws, Drill Adapter, 2-Pack
Universal Socket Wrench – 10-20 mm Self-Tightening Jaws, Drill Adapter, 2-Pack
Free Shipping & Easy Returns
10% Off When You Buy 2+ Items
Details
10–20 mm in one socket · Grips rounded heads · Ratchet and drill ready
One Socket for Every Bolt in the Shed
The mystery bolt on the mower deck. The rounded battery clamp someone chewed up years ago. The fence bolt you cannot match without three trips to the toolbox. Put this universal socket on it, turn, and its jaws close around whatever is underneath, anything from 10 to 20 mm, metric or SAE, hex or square.
What it is
A whole socket rail in one tool
Inside the socket sits a ring of hardened, self-centring jaws. Press it over a nut or bolt head and the jaws adjust to its size, so you stop hunting through the drawer for the right socket.
Each box holds two universal sockets and two drill adapters, so you can keep one set in the garage and one in the truck, camper or trailer.
- 10 to 20 mm: metric or SAE, hex or square heads.
- Self-tightening jaws: the harder you pull, the tighter they grip.
- Forged alloy steel: hardened jaws and a polished finish.
- Ratchet, torque wrench and drill ready: fits a 3/8 in (9.5 mm) drive, plus a hex-shank drill adapter.
Sound familiar?
The everyday socket problems
The old way vs one socket
Retire the socket drawer
Instead of a heavy case full of single sizes, you carry one socket that adapts to the fastener. Grab it, seat it, turn. No more size guessing, no more wrong socket, no more metric-or-SAE question.
Rounded it off?
It still grips
This is the main reason to own one. The hardened jaws close around what is left of the head and wedge tighter the harder you pull. Seat it, turn, and walk the fastener out smoothly, without hammering, vice grips or skinned knuckles.
An honest note: if a fastener is rusted solid into the machine, that is a job for an extractor, and no socket will fix it.
Where people use it
Cars, mowers, campers and around the house
Anything with a head or nut between 10 and 20 mm: battery clamps on an old tractor, the mower deck, the kids' swing set, trailer fenders and camper jacks. It covers most of what lives on a car, a mower, a camper and around the house.
How it works
The jaws do the thinking
1. Press
Push the socket over the fastener. Anything from 10 to 20 mm, metric or SAE.
2. Grip
The hardened jaws centre themselves and clamp the flats tighter the harder you pull.
3. Turn
Turn it out with your ratchet, torque wrench or drill. Reverse to release.
Press, grip, turn
Works with one hand
There is no socket swapping and no fiddly adjusting, so it works one-handed. People with stiff or painful hands, for example with arthritis, often like it for exactly that reason: one socket instead of fishing sizes out of a drawer.
Drill ready
Spin bolts out in seconds
The included hex-shank adapter locks into any drill or driver chuck. Use low or medium speed to break fasteners loose and spin them out, then do the final tightening by hand.
Keep it off a 1/2 in (12.7 mm) impact gun: this is a grip tool, not an impact socket.
Why this one
Universal socket vs a standard socket set
| Universal socket | Standard socket set | |
|---|---|---|
| Fits 10–20 mm with one socket | ✓ | ✗ |
| Grips rounded and worn heads | ✓ | ✗ |
| Works with ratchet, wrench and drill | ✓ | some |
| One-hand operation | ✓ | ✗ |
| Self-tightening jaw grip | ✓ | ✗ |
| Forged alloy steel build | ✓ | some |
Questions people ask
Will it fit my bolts?
Anything with a head or nut between 10 and 20 mm, metric or SAE, hex or square. That covers most fasteners on a car, a mower, a camper and around the house.
How does one socket fit so many sizes?
Hardened self-centring jaws close around the fastener as the body turns, and the drive shape wedges them tighter the harder you pull. The grip grows with the force instead of slipping.
Will it grip rounded-off heads?
Yes. The jaws grab what is left of the corners, which a normal 6-point socket cannot do once the flats are gone. A fastener rusted into one piece with the machine needs an extractor instead.
Can I use it on my drill?
Yes. The hex-shank adapter fits any drill or driver chuck. Use low or medium speed, then tighten the last bit by hand. Do not use it on an impact gun.
What about wheel lug nuts?
Most lug nuts fall inside the size range, but wheel torque is not this tool's job. Loosen lug nuts with a proper impact socket and tighten them with a torque wrench, for safety.
How long will it last?
The body is forged alloy steel with hardened jaws and a polished finish, with no batteries and no electronics. Treat it like a real tool and it will last for years.
Specifications
- Size range: 10–20 mm, metric or SAE, hex or square heads
- Drive: 3/8 in (9.5 mm) drive, for ratchet or torque wrench
- Drill use: hex-shank drill adapter, low or medium speed, not for impact guns
- Material: forged alloy steel body, hardened jaws, polished finish
What's in the box
- 2 × universal sockets
- 2 × drill adapters