Replace harsh overhead glare with soft, architectural accents using this artisan lighting fixture. Designed to resemble clustered magnolia blooms, each shade molds translucent ceramic over a rigid skeleton. The warm illumination diffuses evenly through the petal shapes rather than exposing a naked filament. Supported by a lustrous metallic ring suspended from a matching canopy, this piece bridges modern minimalism and organic elegance.
Select from six tailored layouts to match your room geometry. Linear arrangements span up to 110 centimeters, ideal for rectangular dining settings, while circular tiers measure up to one meter wide for open plazas or round tops. The hardware accommodates standard domestic wiring systems and handles international alternating currents without external transformers. Because master craftspeople hand-form every ceramic cover, subtle shifts in glaze tone and surface texture occur naturally between components—a verified characteristic of fired porcelain rather than a production defect.
- 5-head linear spans 50 × 40 × 30 cm (19.7″ × 15.7″ × 11.8″); weighs 3 kg
- 8-head linear measures 88 × 45 × 30 cm (34.6″ × 17.7″ × 11.8″); weighs 4 kg
- 10-head linear extends to 110 × 45 × 30 cm (43.3″ × 17.7″ × 11.8″); weighs 5 kg
- 12-head ring covers a 60 cm diameter (∅ 23.6″ × H 11.8″); weighs 7 kg
- 16-head ring reaches 80 cm diameter (∅ 31.5″ × H 11.8″); weighs 10 kg
- 20-head ring projects a full 100 cm diameter (∅ 39.4″ × H 11.8″); weighs 12 kg
Each model requires specific socket types for reliable performance. Facilities must install alternating current bulbs rated at 120 volts directly into the integrated holders; direct current variants cause immediate electrical failure. Qualified technicians should manage the internal junction box wiring to guarantee secure grounding and adherence to local construction regulations. The standard suspension package supplies either a flexible cable harness or a rigid support tube, though designers frequently recommend requesting extended drop lengths when coordinating with elevated plaster ceilings prior to fabrication.
Determine the optimal visual impact by scaling fixture width directly against table dimensions or floor area. Seating zones perform best when the arrangement covers approximately sixty percent of the furniture length, preventing spatial congestion while preserving balanced sightlines. Always cross-reference approved certification markings with regional safety standards before securing payment.
| Technical Feature | Specification Detail |
|---|---|
| Total Unit Weight | 3 kg to 12 kg depending on selected head count |
| Bulb Configuration | Sixteen single-pin G4 sockets positioned behind each ceramic shade (bulbs excluded) |
| Required Input | AC 120V exclusively; DC 12V or 24V sources are incompatible |
| Global Voltage | Universal AC 110–240 V compatibility |
| Mounting Class | Hardwired drop ceiling junction box attachment |
| Vertical Adjustment | Factory 59″ pendant wire or 19.7″ rigid stem (extended lengths quoted separately) |
| Switch Integration | Wired to external wall toggle mechanism (device not supplied) |
| Regional Compliance | Meeting regulatory frameworks for North America, EU, Saudi Arabia, and Australia |
| Placement Limitation | Strictly for dry interior environments |