Engineered for adaptability, this ceiling pendant combines a lightweight metal framework with an optical acrylic diffuser to project a soft, uniformly spread glow that surpasses traditional glass in resilience. The streamlined assembly enables smooth horizontal rotation across a 270-degree arc, steering illumination toward seating areas or workspaces while maintaining a fixed vertical clearance of 3.5 inches once secured.
Design Variants & Mounting Profile
Select frame tones ranging from Beige, which harmonizes with traditional and earth-toned interiors, to Green, tailored for contemporary or botanical-focused settings. Both configurations terminate with a standard white acrylic cover. The unit secures flush against your overhead surface through a circular base measuring 4.7 inches in diameter. Internal bracing accommodates direct attachment to flat planes and pitched roofs angled up to 30 degrees without supplemental brackets.
Dimensional Profiles
- Compact option: 11.8 inches across by 3.5 inches deep (30 × 9 cm)
- Standard living space fit: 15.7 inches across by 3.5 inches deep (40 × 9 cm)
- Extended coverage: 19.7 inches across by 3.5 inches deep (50 × 9 cm)
All three diameter selections maintain identical structural depth and install identically to the ceiling plane. Horizontal reach adjusts independently of the fixed suspension length.
Light Output & Electrical Requirements
Integrated semiconductor emitters run on AC 110–240V household circuits. Units arrive factory-configured at 3000K warm white. Substitutions to 4000K neutral or 6000K cool spectrums require advance order modifications. Brightness modulation is available through the triac-compatible circuit board paired exclusively with thyristor-rated wall controls. Conventional rotary dimmer mechanisms will cause operational failure with this driver. The baseline toggle-ready model operates normally alongside fundamental push-button switches.
Technical Specifications
| Parameter | Value |
|---|---|
| Construction Materials | Metal chassis · Optical acrylic cover |
| Illumination Type | Sealed integrated LED array |
| Default Color Temperature | Warm White 3000K |
| Alternative Temperatures | 4000K / 6000K (available upon request) |
| Power Consumption | 30 cm model ≈32W · 40 cm model ≈36W · 50 cm model ≈36W |
| Operating Voltage | AC 110–240V |
| Switching Interface | Standard push-button wall toggle (sold separately) |
| Brightness Modulation | Dimmable variant requires Triac dimmer switch |
| Directional Movement | Horizontal swing left/right · Vertical drop locked at mount |
| Pitched Roof Tolerance | Supports inclines up to 30 degrees |
| Base Cover Diameter | 4.7 inches (12 cm) |
| Connection Method | Direct hardwiring |
| Oversight Location | Above-ceiling installation |
| Safety Classification | IP20 · Dry indoor environments only |
| Compliance Regions | North America · EU · AU · Saudi Arabia |
| Frame Finishes | Beige · Green |
| Cover Finish | White |
Mounting Guidelines
- Permanent mains wiring connects directly to residential distribution panels. Qualified electrical technicians are recommended for ceiling drilling and conductive junction management.
- The mounting plate seals securely against level surfaces and moderately inclined planes without supplementary leveling components.
- Orientation adjusts horizontally only. Once anchored, the suspension length remains stationary.
- Retrofitting existing walls accommodates standard toggle interfaces. Active brightness regulation demands compatible thyristor hardware.
- Deployment restricted to climate-controlled interiors. Prohibited near showers, kitchens, or exterior exposures due to limited moisture resistance.
