Sculpted from natural stone and rich timber, this circular overhead fixture balances earthy textures with clean architectural lines. The outer ring features a genuinely formed yellow travertine surface, softened by internal white acrylic diffusers and anchored by smooth walnut-colored framing. Whether suspended above a kitchen island, dining table, or lounge area, it casts a gentle, directional glow that adds visual weight without overwhelming open floor plans.
For adjustable brightness levels, select the dimmable configuration and connect it directly to a compatible Triac wall dimmer for consistent flicker-free operation. A reference thumbnail is provided below to assist with sourcing the correct switching hardware.
The yellow travertine shell develops slowly over time through natural geological shifts, meaning each unit carries subtle variations in grain density and pore structure rather than manufactured consistency. These authentic surface characteristics complement both traditional and contemporary interior palettes.
Select from two proportional profiles designed to match varying room scales:
- Compact model: Measures 30 centimeters (11.8 inches) across with a low-profile depth of 9.5 cm (3.7 inches). Draws 28 watts to produce 2240 lumens and weighs approximately 3.8 kilograms (8.4 pounds).
- Larger model: Spans 40 centimeters (15.7 inches) in diameter while maintaining the identical 9.5 cm chassis height. Operates at 36 watts for 2800 lumens, tipping the scales at roughly 7.5 kilograms (16.5 pounds).
All units utilize permanently sealed LED modules rated across three standard temperature ranges: 3000K for warm tones, 4000K for daylight neutrality, and 6000K for cool illumination. The fixture accepts universal AC input between 110 and 240 volts. With an IP20 dust protection rating tailored for damp conditions, installation is strictly limited to climate-controlled indoor zones where direct moisture exposure will not occur.
Hardwired ceiling mounting secures the housing to a dedicated electrical box. Operational control relies on a standard external toggle or rocker switch installed separately by a qualified electrician. The suspension system ships pre-measured at 59 inches (approximately 150 cm) and can be customized to greater lengths during production if higher ceilings require additional clearance.
Manufacturing compliance aligns with regional electrical safety frameworks covering North America, Australia, continental Europe, and Saudi Arabia. Technical documentation for setup, dimensional specifications, and engineering models is accessible via the support links below:
Product Specification Sheet: https://drive.google.com/file/d/1mqdAvosrtH0oJ3Y3b4sxmV4G-Mz3JeGn/view
Step-by-Step Installation Guide: https://drive.google.com/file/d/1OP6kbdkTOh5fjGm8VNbifAJpKG4yY7wc/view
D40cm CAD & 3D Modeling Files: https://drive.google.com/file/d/1D0fMROs_hWwa-3-RA_GPK75_UwPp_yAa/view