Merging nostalgic charm with streamlined modern lines, this suspension fixture centers around a hand-blown smoked glass dome. Each shade carries unique artisan finishing details that simply add character rather than indicate imperfections. The enclosed LED panel pushes out a steady, comfortable illumination ideal for highlighting kitchen islands, reading nooks, or expansive loft areas.
Dimensional Profiles
Select the configuration best suited to your room's scale. The compact tier measures 10.2 inches across with a vertical rise of 9.8 inches, resting at approximately 5.6 pounds. The expanded footprint widens to 15 inches while dropping to a refined 6.7-inch height, bringing the total mass to 6.9 pounds. Both variants secure via an identical circular ceiling plate measuring 4.7 inches in diameter and 1 inch deep.
Illumination Settings & Hanging Adjustment
Fabrication begins with a standard warm white 3000K LED engine, though buyers may request neutral 4000K or crisp 6000K outputs before shipment. If you prefer evening ambiance control, choose the variable-brightness model and wire it to a Triac-compatible wall controller to guarantee flicker-free dimming steps. Basic rheostats will malfunction. Three supplied steel links measure 11.8, 15.7, and 19.7 inches, yielding a maximum lowered cable run of 47.2 inches, with elongated chains supplied upon inquiry.
Technical Specifications
| Parameter | Details |
|---|---|
| Primary Construction | Cold-formed metal frame joined to artisan glass sphere |
| Transparent Thicknes | 2–3 cm |
| Luminaire Type | Fixed LED array within the shade |
| Baseline Kelvin | Warm White 3000K; optional 4000K or 6000K available |
| Energ Consumption | Base unit pulls ~12W | Expanded model uses ~16W |
| Input Voltage | AC 110–240V |
| Provided Hangers | Three rods summing to 47.2 inches (30cm + 40cm + 50cm); extended drops available |
| Ceiling Junction Cover | 4.7-inch round cap, 1.0-inch depth |
| Pitch Tolerance | Safety-mounted onto inclines up to 30° without supplementary brackets |
| Operational Switching | Wall plate toggle required; Triac module mandatory for custom dimmable builds |
| Installation Wiring | Hardwired direct-to-grid connection |
| Environment Rating | IP20 certified strictly for climate-controlled interiors |
| Regional Compliance | North America, EU, Australian, Saudi Arabian certifications |
| Hardware Coatings | Polished Gold, Matte Black |
| Diffuser Tints | Warm Amber, Smoked Grey |
Setup Guidelines
- Route house current through a certified electrician for proper grounding and code adherence.
- Power delivery relies completely on a stationary wall toggle mounted nearby.
- Flat plasterboard mounts easily, and the bracket angles cleanly along rooflines leaning no steeper than 30 degrees.
- Rod combinations extend further for unusually tall atriums; contact service directly for bespoke chain lengths.
- Reserve exclusively for dry interior atmospheres; never install over hot tubs, steam rooms, or unprotected exterior patios.