Position this narrow line‑mounted LED fixture above vanities, beside mirrors, or framing artwork in modern interiors. Built from cast aluminum and paired with an opaque acrylic cover, the housing stays under two inches tall while projecting light along flat walls.
Nine dimensional arrangements let you match exact wall lengths. Select from twenty‑seven, thirty‑eight‑and‑a‑half, or fifty‑inch widths combined with three protrusion depths: three‑point‑two, three‑point‑nine, or five‑point‑nine inches. Energy consumption ranges from twelve to twenty‑four watts depending on span, producing one thousand three hundred twenty to two thousand six hundred forty lumens.
| Length | Protrusion Depth | Power Draw | Lumens |
|---|---|---|---|
| 27" (68 cm) | 3.2" / 3.9" / 5.9" | ~12W | 1,320 lm |
| 38.5" (98 cm) | 3.2" / 3.9" / 5.9" | ~18W | 1,980 lm |
| 50" (128 cm) | 3.2" / 3.9" / 5.9" | ~24W | 2,640 lm |
Operates via a built‑in seventy‑point‑eight‑inch power lead that plugs directly into standard household outlets, removing the need for licensed electricians. A mechanical toggle sits precisely at the midpoint, ninety centimeters from the housing end. Dimensions of the backing plate measure four point seven by two by one point three inches; attach firmly using suitable wall anchors or wooden studs. The IP20 rating restricts usage to completely dry indoor environments.
Units ship configured with warm white diodes rated at three thousand kelvins. Request neutral white (four thousand kelvins) or cool white (six thousand kelvins) settings during checkout. Exterior metal is offered in solid black or metallic gold, covering the internal white diffuser.
Installation & Compatibility Notes
Projection geometry delivers uniform washing patterns across standard picture mats. Heavily layered frames or thick museum glass blocks might receive partial shadowing on lower edges. Technical blueprints and assembly instructions are available through official supplier portals. Because the circuitry uses soldered LED modules rather than replaceable cartridges, long term reliability is expected high; backup drivers remain stocked for extended warranty periods. Internal components withstand input voltages spanning one hundred ten to two hundred forty volts alternating current across international certification boards.
- Hardwiring is unnecessary; plug directly into existing sockets.
- The mounting bracket aligns with standard wall thicknesses.
- Cord length stands at seven feet four inches permanently.
- Voltage compatibility covers global residential grids.
- Maintenance requires no bulb swapping.
