Designed for expansive interiors and high-ceilinged entryways, this vertical pendant system utilizes clear, hand-blown glass modules that link together to form a continuous column of illumination. Each segment houses an embedded LED ring, allowing users to customize drop height and visual impact by selecting from thirteen distinct setups. The collection accommodates architectural voids, restaurant dining floors, boutique hotels, gallery walls, and modern residential stairwell openings. Lighting intensity and overall proportions scale dynamically based on the number of connected units and selected housing profile.
The fixture operates exclusively at indoor dry locations, making it appropriate for reception lobbies, open-concept kitchens, corridor hallways, and museum display zones. Moisture exposure remains strictly prohibited, so bathrooms, poolside courtyards, covered patios, and overhead kitchen sinks are unsuitable installation points. All models require hardwiring directly into a single overhead junction box rated for a minimum thirty-pound load capacity.
Pre-Power Assembly Requirement
Electrical continuity relies on direct metal-to-metal contact between each suspended piece. Activating the circuit while modules remain disconnected creates open contact points that generate dangerous electrical arcing. This condition instantly destroys the internal LED driver and voids all warranty protections. Every component must be mechanically secured in the exact order printed on shipping cartons before applying any electrical current. Verify all connections are tightly seated before engaging the wall control switch.
Shape Selection & Drop Height Guide
Choosing the right silhouette depends on how light interacts with your ceiling volume. Narrow cylindrical segments generate a linear light pillar best suited for tight stair shafts or long hallway corridors. Tapered conical housings direct beams downward for focused task lighting over banquet surfaces or prep counters. Wide domed bowls cast a diffuse, encompassing glow ideal for welcoming entries and broad gathering areas. Match your ceiling elevation to the recommended module count below to maintain six to eight feet of clearance beneath the lowest glass element.
| Profile | Size Variant | Ø × Height | Power Draw | Total Weight | Recommended Use |
|---|---|---|---|---|---|
| Cylinder | 1 Module | 7.1″ × 14.2″ (18 × 36 cm) | 10W | 3.3 lbs | Bedside lamp, vanity accent, small alcove |
| Cylinder | 2 Modules | 7.1″ × 37.8″ (18 × 96 cm) | 24W | 9.9 lbs | Kitchen peninsula, single-drop dinner table |
| Cylinder | 3 Modules | 7.1″ × 50.4″ (18 × 128 cm) | 30W | 13.2 lbs | Bifold entryway, mid-rise staircase cavity |
| Cylinder | 4 Modules | 7.1″ × 62.9″ (18 × 160 cm) | 36W | 16.5 lbs | Cathedral grand staircase, 14–16 ft vaults |
| Cylinder | 5 Modules | 7.1″ × 75.6″ (18 × 192 cm) | 42W | 19.8 lbs | Lobby atrium, deep stairwell drop, 18–22 ft ceilings |
| Cone | Short | 10.2″ × 22.4″ (26 × 57 cm) | 18W | 6.6 lbs | Standard dining surface, breakfast bar |
| Cone | Medium | 10.2″ × 35.0″ (26 × 89 cm) | 24W | 9.9 lbs | Double-height entry, single flight stair opening |
| Cone | Tall | 10.2″ × 47.6″ (26 × 121 cm) | 30W | 13.2 lbs | Expansive great room, sweeping staircase |
| Cone | Extra Tall | 10.2″ × 60.2″ (26 × 153 cm) | 36W | 16.5 lbs | Gallery display zone, resort lobby, 18–20 ft ceilings |
| Bowl | Short | 15.8″ × 20.9″ (40 × 53 cm) | 18W | 6.6 lbs | Large family dining, casual kitchen hub |
| Bowl | Medium | 15.8″ × 33.5″ (40 × 85 cm) | 24W | 9.9 lbs | Traditional dining room, single-level foyer |
| Bowl | Tall | 15.8″ × 46.1″ (40 × 117 cm) | 30W | 13.2 lbs | Vaulted entrance hall, prominent landing |
| Bowl | Extra Tall | 15.8″ × 58.7″ (40 × 149 cm) | 36W | 16.5 lbs | Commercial atrium, museum void, multi-floor lobby |
Optical & Electrical Characteristics
Each unit contains a factory-sealed LED array permanently mounted within the glass enclosure, meaning replacement bulbs are neither compatible nor required. Users select one lighting tone during checkout, with options spanning 3000 Kelvin warm yellow, 4000 Kelvin neutral daylight, and 6000 Kelvin cool white. Energy consumption ranges from ten watts for standalone configurations to forty-two watts for maximum seven-foot vertical drops. All fixtures operate on standard alternating current between 110 and 240 volts. A twenty-meter suspension cord attaches to a matte black steel ceiling plate and connects through matching black metal interface rings that secure each glass tier. Dimmer compatibility exists upon special arrangement; standard toggle switches provide basic on/off functionality out of the package.
Multi-Unit Hanging Strategy
Vast cubic volumes benefit significantly from coordinated installations. Suspend three to nine identical pendants from a shared mounting platform, staggering drop lengths to create layered depth and rhythmic shadows across gallery floors or hotel atriums. Contact manufacturer support for custom canopy fabrication and wire distribution planning when arranging large-scale groupings.
Technical Specifications
- Construction materials: Hand-blown transparent glass, aviation-grade aluminum supports, powder-coated metal fasteners
- Sourcing technology: Fixed-diode array installed inside every segment
- Beam temperature: Customer-selected 3000K, 4000K, or 6000K
- Rail length: Twenty-centimeter drop adjustment plus extension availability
- Mount method: Direct ceiling wiring into approved utility box
- Weight tolerance: Hardware requires minimum thirty-pound anchor rating for maximum configurations
- Regulatory compliance: Meets North American, European, Australian, and Saudi certification frameworks
Always engage a certified professional to perform overhead wiring. Verify structural beam integrity matches fixture loads before drilling. Strictly maintain indoor placement away from steam sources, spray water, and exterior weather exposure. Detailed installation manuals, dimensional blueprints, and CAD geometry files remain accessible through official documentation portals.